1. Product model and description
1.1 Product mode:
Product model | Product model | Cable specifications | Cable & Length | Other requirements |
XOA-DC-E01 | 90*58*35 | COLOUR:RED/BLACK/BROWN/BLUE | 500M | NULL |
1.2Product description:
The drive module of the electromagnetic lock is connected between the charging pile providing continuous voltage for the electromagnetic lock and the charging gun for the electromagnetic lock. When the 12V power supply is connected, the instantaneous drive module outputs positive pulse voltage to the electromagnetic lock, locking the electromagnetic lock;When the power supply is disconnected, the drive module outputs negative pulse voltage to the electromagnetic lock to unlock the electromagnetic lock.
2.Technical parameters:
2.1 Electrical parameters:
- Rated voltage:DC12V
2.2 Environmental conditions:
-Working temperature: -40°C~ 50 °C
- Ambient temperature (storage/transportation)): -20 °C ~50 °C
- Highest elevation:5000M (above sea level)
2.3 Color definitions
- Shell:white gray
- Cable:RED/BLACK/BROWN/BLUE
2.4 Standard:
- GB/T 2423.1-2008
- GB/T 2423.2-2008
- GB/T 16935.1-2008
- GB/T 18487.1-2015
3. Drawing:
3.1 Size:
3.2 Pin and circuit diagram:
12V:Power Positive;0V: Power Negative;EL+:Lock Positive;EL-: Lock Negative
3.3.Electronic lock control method:
- WorkingVoltage:DC12V。
- The input terminal is protected by voltage reverse connection. When the positive and negative terminals of the power supply are connected to the negative, the circuit will not work and will not be damaged. After the positive and negative terminals are exchanged, it will work normally。
- When the power supply is switched on, the instantaneous drive module outputs a 1-second positive 11.3v pulse to the electromagnetic lock, locking the electromagnetic lock。
- When the power supply is disconnected, the driver module outputs a 1-second negative 11.3v pulse to the electromagnetic lock to unlock the electromagnetic lock。
- In the electromagnetic lock lock time, the electromagnetic lock is not energized。
3.4 Logo:
- The shell contains the basic product name, product model, supplier's trademark, and traceability code. It is strictly prohibited to intentionally destroy the shell.